- Recommend a Bench Grinder / Polishing Set...
- If you have a computer in your workshop
- Imitation Polyester Pearl
- Show your chip repairs!
- Looking for some constructive criticisim
- Red Imp Restore
- wood burning
- Any suggestions as to where to purchase scale materials
- First restoration - Boker
- Sandpaper project
- Removing rust
- Ideas on how to remove a knot from a brush sans drill.
- Razor Repair
- Where to buy stuff thread
- Large chip in toe - what to do for aesthetics?
- Alternatives to microfasteners?
- Buffing hollow ground razors is tricky
- Rust on a C-Mon
- Ouch
- Lost my Temper!
- Bone inlay in wood scales
- Material question.
- First time pinning!
- Frederick Reynolds ... question
- 1st Attempt at a basic restoration
- Wooden scales and their treatment?
- Beginning First restore
- Resins in the UK
- Oil for razors question.
- Need some advice after I heard my husband cursing in the bathroom.
- Scales questions!
- 7/8 Barbers use W&B
- Inlay repair?
- Damaged razor
- Tools of the trade...
- One Piece Scales - Problems and Solutions
- So it's come to this: Building my own tools.
- Advice on hand sanding...
- Removing Engravings
- Domed washer preservation
- Pivot washers?
- Pit too deep?
- What grit to start on?
- I *thought* I could tell the difference between tortoise and dyed horn...
- Autoclave and Boiling sanitation
- Sanding jig
- Minimum Tool Set, Comments?
- First restore
- Question on pin diameter
- Fenney Tally Ho Restore or Not ?
- Leather Scales
- Criteria
- Using wax
- A couple questions on scale fit & repairs
- Coating
- Restoration
- Average Restoration Cost?
- Machinist stone tools for the pivot area.
- What if boiling and compressing the horn doesn't straighten it?
- Restoring a blade while preserving etching
- My pins do not meet my approval
- Repair or Replace Scales
- Chipped DD
- Cut me to the Bone
- new project. My 4th razor
- The Foundation of Our Lives Built On Hollow Ground
- Peening Tip
- Good Candidate?
- question about cleaning bolsters
- Worth Saving?
- A candle and a razor
- Dovo spine ground unevenly...repair?
- Peening with soft aluminium rods
- Restoring an old pipe wedge with light etching.
- Greaseless
- My first "Restore". Strange wedge advice.
- New to restoration, before I get in over my head
- Tally Ho!
- Saving the Etch?
- Imagine
- Grinding a full wedge
- Peening material stock?
- Straightening bone?
- Stabilize Olive Wood?
- Can a edge 'ding' be repaired?
- Greaseless problem
- How to date JOSEPH ALLEN & SONS SHEFFIELD NON-XLL
- Restoration Chicago
- Worcester Razor, my 1st restore
- Splitting hairs
- Restoration Strategy and Ownership Philosophy
- Celluloid
- Questions before restoring....
- Because its never too far gone!
- Like advice on scale material
- Scale wedge thickness
- strange stain (does not look like a water stain)
- I'm a idiot
- Seeking Restoration
- I need help!!!
- custom straight razor blade size
- Safety Tip!
- Flap wheels
- Celluloid, bakelite, and lignum vitae
- Restoring rusty, old blade. Which finish do you go for?
- Is there a way?
- Wedge material find.
- polishing the edge
- Sand blast
- Scales drying rack, AKA "Mini Monkey Bars"
- Wood for scale
- Pins flush wih scales..
- Need help installing scales on razor
- Need help choosing scales for razor
- Restoration supplies
- Just finished and tested.
- Anyone want some steel for blades?
- Dovo Fritz Bracht #88, restorable?
- Is it worth the effort?
- would sisal wheel be better.
- Green scales turning black after sanding
- Caswell Compounds
- Caswll Compounds
- First Razor restore - $10 ebay special, almost
- My new setup
- Creating controlled patina?
- Old english razor - scale restoring
- Me + dremel = disaster
- Restoring very old razor
- Micarta - G10
- Small drill press
- onion and sugar to clean or polish
- Sticker stained scale..Any fix?
- my greaves
- Source for Ivory for razor scale repair?
- Cleaning the pivot
- pin tightening advice
- Scale joinery experiment
- I would like opinions on this method of removing the pin/washers.
- Buffer /Grinder question...
- Golden Beauty Restoration
- Greaves Restore for JaNorton
- Otto Hans repair.......
- A Fresh Perspective and New Year’s Resolution
- Work in Progress Pics
- Iwasaki Kamisori Repair/Restore
- What's best for polishing a blade?
- Laser engraving on a Wosty I-XL?
- Band Saw question
- Polish Between Grits.....
- Newbie to Restoration! What do I need?
- Source for pins and washers
- Hey, Let's Be Careful Out There
- Today's acquisitions - opinions?
- Interesting Japanese western
- VCI Paper?
- belt sander modification = belt grinder?
- Scale sanding.
- Cracked blade help.
- Engels Restore: How do you save the metal caps on the scales?
- first razor restore (in progress)...help needed
- Newbie Genco Restore
- Razor restoration sander........
- Making 1700s style razors today
- Questions on a restoration
- polishing black plastic scales - suggestions and tips
- Grain direction on spacer wedges
- Money Saving
- Light Razor Restoration with Lynn Abrams
- Quick Scale Thickness Question
- Tiny sized washers - FYI - Found a UK Supplier
- Fix for cracked scales?
- Progression
- Machines used in razor making (part 2) or "playing with power tools"
- thoughts on a 7 day set (and how to display)
- Check my Razor Design
- Anyone ever made a Single Edge?
- Question about hone wear
- Scan of a scale?
- Allen's Dry Hone Orleans.N.Y.
- Fenney "tally ho"
- Which material is best, for scales
- How do you make your jimps?
- Razor from A-2?
- First complete teardown (Boker)
- help removing minor nick from blades edge
- Hart Steel Replacement Scales
- Machines for Straight Razor Production
- Filarmonica replacement scales!! ??
- My last razor.
- Tungsten pins?
- Has anyone tried thas?
- $7 ebay pickup w/ pics
- Buffer and proper wheel size
- Determining Junk on Ebay
- Scales
- Quick question on pinning
- Water Spots
- First cut is the deepest........I hope.
- CAD drawing
- Question about buffers
- Double wheel grind ?smile?
- starting making scales
- Polishing Micarta
- My starters.
- It's very zen like
- Thinking about starting to restore razors :)
- A new jacket for my Dorko 8/8
- Just getting started
- Fixing a smile?
- Are painted scales a good idea?
- help! does any one do carbon fiber work?
- New Drill Press!
- First hand sanding process and question...
- Archive of makers marks?
- CLR?
- W & B, Blade split, repairable?
- Pinning Video
- Extreme spine wear, Near Wedge or What?
- Anybody use camellia oil on... a DE?
- Crappy Tire Special : Rotary Tool Set
- first repair work - advice needed...
- Rays Shop Tour
- Replating TTO razors....dissassemble first? or no?
- Thanks to the chat group
- Can this be fixed to shave again????
- W&B Project
- Power tools
- What tools are in your dream workshop?
- Mooney's Blue Steel + Grinder! = ???
- My First Restoration Attempts
- Sanding
- MAAS and others...
- re-scale?
- W&B What should I do ?????
- A covered tang rebuild
- A lost cause?
- best sand paper for my project?
- Source for acetate tortoise shell?
- Electricians! I need guidance!
- New scales
- Another couple of ebay rescues - Edaco 11 and John Milner Intrinsic
- Simple W&B
- CA glue accelerators?
- Holloween Hone coffins:)
- My scales
- I don't suppose it really matters - but?
- First go at a restoration
- Using a dremel
- Carbon Fiber scales, finishing?