Results 1 to 4 of 4
Like Tree3Likes
  • 3 Post By MODINE

Thread: OVB No 96 “Our Very Best” Barber hone test

  1. #1
    Modine MODINE's Avatar
    Join Date
    Dec 2009
    Location
    Lee's Summit, Missouri- (KC)
    Posts
    1,420
    Thanked: 637

    Default OVB No 96 “Our Very Best” Barber hone test

    Here is the OVB No 96 “Our Very Best” by the Hibbard, Spencer, Bartlett @ Co. barber hone being tested. This is a two-sided barber hone and only the branded side for finishing will be tested. No other instructions came with this green and black hone that measures 5”L x 2”W x ½H+-”. History lesson courtesy of Wullie! http://www.thckk.org/history/hsb.pdf

    Two identical King Midas Extra Good razors were chosen to test this Barber hone. Both razors were taken to a 1K-4K-Norton 8K level. One of the razors was then progressed to the approx. 15K level on a much finer stone. The edges were visually inspected at 100X magnification at each interval.

    8 X-laps, strokes or passes were made with each razor on the OVB to see if it would improve or degrade the razor taken to the Norton 8K edge and the razor honed to the approx. 15K edge.

    Conclusion, the OVB No. 96 H.S.B.& Co barber hone did not improve or degrade the Norton 8K edge. It is an aggressive barber hone that can refresh an edge to the 8K level. The approx. 15K edge was degraded. I highly recommend that only 4 laps be done on this barber hone. Indication of a wire or foil edge were becoming evident at 8 passes. Stropping on leather would smooth the edge.
    MIke



    sharptonn, rolodave and RezDog like this.

  2. The Following 5 Users Say Thank You to MODINE For This Useful Post:

    Brontosaurus (11-14-2017), Geezer (11-14-2017), RezDog (11-15-2017), sharptonn (11-15-2017), Steve56 (11-15-2017)

  3. #2
    Senior Member BeJay's Avatar
    Join Date
    Jan 2013
    Location
    Communist State of California
    Posts
    1,383
    Thanked: 428

    Default

    Nice review. I don’t think any of the old barber hones are going to improve a 15k edge. If it’s on par with a Norton 8k, I’d say it’s a keeper.
    B.J.

  4. #3
    The First Cut is the Deepest! Magpie's Avatar
    Join Date
    Feb 2010
    Location
    Upper Middle Slobovia NY
    Posts
    2,482
    Thanked: 431

    Default

    Are you positive the branded side was the finishing side?

  5. #4
    " Atta Boy!!" sharptonn's Avatar
    Join Date
    Oct 2010
    Location
    Lone Star State
    Posts
    18,617
    Thanked: 5981

    Default

    Quote Originally Posted by BeJay View Post
    Nice review. I don’t think any of the old barber hones are going to improve a 15k edge. If it’s on par with a Norton 8k, I’d say it’s a keeper.
    I think if a few strokes did not degrade the 8k edge, does not necessarily say how long it would take to achieve it from a lower level. Just to refresh the edge is the criteria, I think?
    Quote Originally Posted by Magpie View Post
    Are you positive the branded side was the finishing side?
    Is the branded side not usually the finer one?
    Look at the Movember auctions in the BST!
    Buy and/or sell for a good cause!
    http://straightrazorplace.com/movember-auctions/

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •