Results 1 to 7 of 7

Thread: CrO powder sample from Chrisl

  1. #1
    Does the barber shave himself...? PA23-250's Avatar
    Join Date
    Jan 2008
    Posts
    726
    Thanks
    104
    Thanked 97 Times in 84 Posts

    Default CrO powder sample from Chrisl

    This is the stuff that was being sold by HandAmerican in 4 oz tubs. I had been curious to try CrO for some time (everybody said it puts such a smooth, sharp final polish on a razor), but wasn't prepared to spend $18 for a huge tub of the stuff if it didn't work for me. Well, I found this while browsing the classifieds and saw it was only $4--not too much to lose if I didn't like it, so I went for it.

    It came in a little plastic baggie w/ instructions detailing exactly how to apply/use it. I used a tiny amount (there's still plenty left) in Lexol to make a paste for an old strop I found in a junk shop. I kept the coating pretty light, since I remember reading that "less is more" with this stuff.

    First up was my 5/8 Gunmetal--it only had one shave off the coticule. Second was my SRP TI fresh off said coticule. The gunmetal got 15 light swipes; the TI 20.

    The shaves: best ever! I was getting good shaves off the coticule with one problem: my chin. It needed 4 passes (2 XTG, 1 ATG) to accomplish what I got with 2 everywhere else, and even then, it wasn't perfect. This gave me a completely BBS chin in only 3 passes! Using only the weight of the blade; no added pressure! I should probably back up and say that I did the BBS shave w/ my TI, and a more "everyday" shave w/ the gunmetal. (I didn't go for BBS on the latter, but everything was still smoother than ever before.) Both shaves also lasted longer. As I type this, it's been over 24 hours since I last shaved, and I still look presentable.
    The shave was also smoother. It was very comfortable with no tugging or irritation right out of the gate. With just the coticule (good as it was), it sometimes needed a couple shaves to smooth out.

    I highly recommend this stuff as a finisher and also recommend Chrisl as a good source for sample sizes!

  2. The Following User Says Thank You to PA23-250 For This Useful Post:

    ChrisL (08-11-2008)

  3. #2
    Senior Member Navaja's Avatar
    Join Date
    Apr 2008
    Location
    Florida
    Posts
    341
    Thanks
    1
    Thanked 53 Times in 40 Posts

    Default

    +1 on CR2O3

  4. #3
    SIB
    SIB is offline
    sergioclassic SIB's Avatar
    Join Date
    Mar 2007
    Location
    Los Angeles
    Posts
    275
    Thanks
    7
    Thanked 32 Times in 15 Posts

    Default

    I also had a great experience buying from him, highly recommended.

  5. #4
    Senior Member ChrisL's Avatar
    Join Date
    Oct 2007
    Posts
    4,008
    Thanks
    624
    Thanked 779 Times in 558 Posts

    Default

    Thanks guys. I'm glad to hear it's working well for you two. Hundreds+ of Chromium Oxide users can't be wrong!

    I have more to spare and will update the classifieds to make sure it shows an adequate quantity.

    Chromium Oxide rocks!

    Chris L

  6. #5
    Senior Member CactusBob's Avatar
    Join Date
    Mar 2008
    Location
    Vail AZ
    Posts
    384
    Thanks
    5
    Thanked 26 Times in 23 Posts

    Default

    @ PA23-250 I totally agree.
    I just received some CrO from Chris as well and couldn't have said it better. I would also recommend ChrisL and the CrO.

    Bob

  7. #6
    Senior Member Mike7120's Avatar
    Join Date
    Mar 2008
    Location
    Ashland, Kentucky
    Posts
    479
    Thanks
    66
    Thanked 72 Times in 70 Posts

    Default

    For 5 months now I've always went directly from the 8k Norton to the strop and got good results. I heard a lot of good things about CrO and decided to give it a try. I didn't want to spend $20 for a large tub of it, not knowing if I'd like it or not so I got a sample from Chris L. For $4 I was able to paste two strops and still had a lot left over. The results are stunning. Going from the 8k to the CrO and lastly the leather strop gave me the best shave ever. For any of you that want to try your luck with CrO, but don't want to spend a lot of money, Chris L is the man to talk to.

  8. #7
    Connoisseur of steel Hawkeye5's Avatar
    Join Date
    Mar 2007
    Location
    Nashville, TN
    Posts
    939
    Thanks
    261
    Thanked 442 Times in 138 Posts

    Default

    I also received some CrO from Chris. It was used on one side of a two sided paddle. Messy, but good. I have enough left to last for a long time. Great product and very reasonable price for the amount he sends. 4oz would last several lifetimes.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •