Results 1 to 8 of 8

Thread: Dang I am good- at messing things up

  1. #1
    Junior Member overlandequip's Avatar
    Join Date
    May 2010
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default Dang I am good- at messing things up

    I am fairly new to using a straight razor. I received a new razor and it was not honed properly from the get go..I sent it to Lynn he did a jam up job. He did recommend a zink oxide stick for the back side of my strop to help keep it keen.
    Things were going great in my straight razor world and then i did it...All I can figure is i must of nicked the edge of my leather strop and ran the blade over it a few times before i noticed. When I was done stropping I noticed a little leather on the blade. I gently scratched it of and noticed a very slight deformation in the blade. It is extremely small, but none the less it is still there. I have used the razor and it is pulling a little now. I just place an order for the crome ox and some strop neatsfoot oil. Do you all thing the crom ox will correct the deformation in the blade?

  2. #2
    SRP Founder
    Lynn's Avatar
    Join Date
    May 2005
    Location
    Cape Girardeau, Missouri, United States
    Posts
    6,534
    Thanks
    1,275
    Thanked 3,050 Times in 1,224 Posts
    Blog Entries
    2

    Default

    Shoot it back and I'll fix it and re-hone it for you on me.

    Have fun,

    Lynn
    Srp Founder
    Honed 40000 razors over the last 15 years

  3. The Following User Says Thank You to Lynn For This Useful Post:

    ShavedZombie (07-17-2010)

  4. #3
    Born a Hundred Years Too Late aroliver59's Avatar
    Join Date
    Sep 2008
    Location
    Way Upstate,NY
    Posts
    1,248
    Thanks
    160
    Thanked 305 Times in 270 Posts

    Default

    YOU are a gentleman and a scholar, Mr.Abrams.

  5. #4
    Junior Member overlandequip's Avatar
    Join Date
    May 2010
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    You truly are.. I cannot believe the blade is that delicate. I couldn't have ran over it more than once or twice. Since the mistake I have sanded the strop down and rubbed it smooth. Can I give you a call one day Lynn? And thanks again.

  6. #5
    Well Shaved Gentleman... jhenry's Avatar
    Join Date
    Dec 2009
    Location
    Indianapolis, IN
    Posts
    3,128
    Thanks
    2,536
    Thanked 3,679 Times in 860 Posts

    Default

    overlandequip,

    Believe me...They are.

    Thanks Lynn, for helping out another SRP member.

  7. #6
    < Banned User >
    Join Date
    Oct 2009
    Location
    Medina, Ohio
    Posts
    1,286
    Thanks
    524
    Thanked 526 Times in 246 Posts

    Default

    Another thing to take into account: If you, AT ALL, flipped the razor and the edge baaaarely tapped the hardware at either end, depending on how hollow ground it is, that may be the culprit.

  8. #7
    Str8 & Loving It BladeRunner001's Avatar
    Join Date
    Apr 2010
    Location
    Twilight Zone
    Posts
    3,741
    Thanks
    3,046
    Thanked 3,176 Times in 1,171 Posts

    Cool Lesson learned

    Well, we've all done something like that t some point or another...Except me , of course.

    It is very nice of Lynn to do this.

    I apologize for my ignorance, but I didn't know about ZnOx...CrOx, I know, but ZnOx...that is new. Nevertheless, CrOx is a nice green paste...it gives the edge a nice smoothness. I use it and got it from SRD.

    My advice: get another razor that you can mess things up on or practice on...something you don't care that much about. This way, you can use it to learn honing, polishing edges, etc...and never worry about this happening again.

  9. #8
    Junior Member overlandequip's Avatar
    Join Date
    May 2010
    Posts
    9
    Thanks
    0
    Thanked 0 Times in 0 Posts

    Default

    You are correct it is crox. Note to self engage brain when typing Thanks for the advice Blade Runner....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •