Thread: Creating A Razor....

Ok, so I have purchased my fleet of straight razors, been shaving with them for a year or so and now I feel like going one step further. I want to make my own scales. I already have a bit of an idea what I want, but i'm still not entirely sure how to start. Here is what I have for plans so far....

- find a good blade that may be in need of honing and still has alot of life in it but may be requiring new scales as the old ones may be chipped or broken, or just nothing special.

- use some deer antlers that I have aquired in order to make some blanks, then become creative or something and maybe carve a design in them or something. (this step i'm still not so sure about.)

- finish it with some waterproofing material

- hone, strop, and shave

- oh, and maybe make a matching shaving brush, kinda like a set or something.

I'd love any ideas, suggestions , or help. Oh and if you have any ideas of what I might carve into the scales (and possibly the matching brush handle) please message me.

Sounds like you got it all in line. I would get some cheap wood and do a test set before you start cutting the horn just so you have a feel for it. Other than that good luck and have fun!!!

I just started making my own scales. I recommend starting in wood. You should be able to get some walnut cheap, and wood is easier to work than bone. Even if you end up trashing every wooden set you make, you still save on all the bone you would have used practicing. It really isn't as hard as you would think though. I have made 3 sets using just a pocket knife, hammer, sandpaper, wire cutters, and the materials for the scales and pins.

Drew

Oh, and you are going to need a 1/16" drill bit, 1/16" brass or nickle rod, size 0 washers (got mine from microfasteners), and you are going to want your scales about 1/8" thick when you start. Sanding you will probably remove a solid 1/3 of that, leaving your scales just about right.

This is only my 3rd set of scales and they just keep getting better, like my brother said(sbrouwers), its not a bad idea to get some cheap wood to practice on.......I just dove into these .

Very nice. I haven't tried anything in plastic yet (I'm assuming that is G10?). I just love the look of wood scales too much.

Originally Posted by DPflaumer

Very nice. I haven't tried anything in plastic yet (I'm assuming that is G10?). I just love the look of wood scales too much.

My first 2 sets were clear acrylic and they turned out great, but my favorite set are on my John Wragg 7/8 full hollow done once again by my brother......Black and White Ebony......man I need to wipe the oil of my blades for pics. And yes, thats Jade Ghost G10, thanks for that idea Max!



Ahah! Found pics of the first set, sbrouwers old Butcher that now has a new home.



Don't be afraid to try something, I just winged these and you see how they turned out, don't be scared! Nuff said.

I love the W&B with the clear scales! I might have to get my hands on some acrylic to try out. Unfortunately I just don't have the tools in my apartment to work with the G10, but maybe I will try my hand at it when I go home for Christmas since my dad has every tool known to man (transmission mechanic/amateur carpenter)

There is really no need to worry when trying to make scales, brass rod is cheap, microfasteners gets you 100 washers for $8 shipped, and acrylic and walnut are both very cheap. Have at it!

Where do you find clear acrylic or just acrylic at?

Antler stinks when you burn it with a saw or drill. Just be prepared. Sounds cool though.